Giant-Vac TLG101651KH, Руководство оператора

Страница: 7 / 12

OPERATING THE UNIT:
DANGER! Never insert any part of the body or foreign object in any opening while
machine is running
.
GENERAL OPERATING GUIDELINES:
•
Check chain adjustment before use. With engine throttled up to full operating speed, you should
be able to push the nozzle to the ground and pull it back up using three fingers of one hand. If
not, adjust chain length accordingly by slipping the S-hook into an appropriate mid-link.
•
If leaves are dry, run engine at approximately half throttle. This will help reduce debris blow-by
through the screen. If leaves are wet, run engine at full throttle.
•
For dry leaves, a short back and forth flicking motion of the nozzle just above the pile should be
sufficient. For wet leaves, dig into the pile with a gulping motion, and then move the nozzle away
to allow leaves to flush through.
•
Avoid sand, gravel or stones, as debris of this nature is very abrasive and can damage the
impeller and housing.
•
Make sure the driver of the vehicle has operator in full view at all times. Operator should stand to
the side of the vehicle when operating truck loader, never behind.
TRANSPORTING THE UNIT:
Caution: When transporting Truck Loader, do not exceed 30 mph. High-speed driving
and poor road conditions can cause damage to the truck loader and towing vehicle
.
•
Remove the boom chain and swivel hose support boom to side of debris box and secure with rope
or hardware. Fasten hose and nozzle to unit frame using rubber tie down (#29).