GVTP GM48-R0103.1
4
unit operation
STARTING THE ENGINE
IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way
meant to replace or supercede engine manufacturer’s operating instructions. In order to obtain optimum
performance from your engine, refer to your engine manual.
BEFORE STARTING ENGINE:
•
Be sure that the unit is completely assembled, all fasteners are tightened securely, and all safety guards
and components are in place.
•
Be sure to check engine’s
oil
and
gasoline*
. (See engine manual for recommended oil and gasoline
specifications.)
Never
check the engine while it is running or while you are smoking. Check only when
engine is cold.
* All machines are shipped without oil or gasoline unless otherwise noted.
•
Be sure that fuel valve on tank is set to open
position.
TO START ENGINE:
•
Set throttle control to “Start” position. If your
engine has a fuel prime button, depress it firmly
three times.
•
Turn ignition key past ‘run’ to ‘start’. (If engine
fails to start within a reasonable amount of time,
discontinue and check engine manual for
further instructions.)
•
After engine starts, release ignition key and
move throttle control down to approximately
half.
CLOSED
OPEN
