4
unit operation
STARTING THE ENGINE
IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way
meant to replace or supercede engine manufacturer’s operating instructions. In order to obtain optimum
performance from your engine, refer to your engine manual.
WARNING! IMPELLER IS MOUNTED DIRECTLY TO ENGINE SHAFT –
STARTING ENGINE WILL RESULT IN IMMEDIATE HIGH-VELOCITY
DISCHARGE. TO AVOID INJURY OR DAMAGE, BE SURE DISCHARGE IS
POINTED AWAY FROM PEOPLE, PETS AND PROPERTY WHEN STARTING.
BEFORE STARTING ENGINE:
•
Be sure that the unit is completely assembled, all fasteners are tightened securely, and all safety guards
and components are in place.
•
Be sure to check engine’s
oil
and
fuel levels* and add as needed
. (See engine manual for recommended
oil and gasoline specifications.)
Never
check the engine while it is running or while you are smoking.
Check only when engine is cold.
All machines are shipped without oil or fuel unless otherwise noted.
•
Be sure that fuel valve is set to open position.
OPEN
CLOSED
TO START ENGINE:
•
Move choke control located on engine to the
closed “ON” position.
CHOKED
•
Move engine speed control, located on the
handle, to the fast “Rabbit” position.
ENGINE
SPEED
CONTROL