3
unit assembly
Connect overflow tube to battery. Fill battery with
acid (auto supply store). Place battery in box with
terminals facing in. Make necessary battery cable
connections with hardware supplied with battery,
noting correct terminal designations (black to (-);
red to (+). Place rubber weather cover and top
strap over battery and secure strap with two 5/16-
18 x 1” bolts, lock washers and nuts. Tighten
snugly.
Attach Mounting Bar to front of mower/rider by lay-
ing bar against front caster arms and slipping one
U-bolt around top and bottom of each of the two
front caster arm bosses and through correspon-
ding holes in bar. Be sure bar is centered.
Secure each U-bolt to bar with one 3/8” flat wash-
er, lock washer and nut on each of the eight
threaded ends. Tighten all hardware securely.
Positioning blower in front of rider, position each of
the two mounting struts into the mounting bar hitch
brackets and secure each strut with mounting pin.
