Battery Replacement:
To replace the
battery remove the two screws from the
back of the remote and the top of the
case will separate (Fig 3). Using a small
screwdriver or paper clip put pressure at
one of the slots of the battery holder to
slide the battery down until it can be
removed (Fig 4). Replace only with a 3V
CR2032 battery and slide it into place
making sure that the side with writing is
facing up. To close the case, have the top
of the remote facing down and put the back on it, making sure that the two buttons are at the same side as the two
buttons on the circuit board then insert the screws.
Warranty:
This remote carries a one-year manufactures
warranty against defects in workmanship or materials
commencing from the purchase date of the remote. For
warranty claims the remote needs to be returned to the
dealer or distributor it was purchased from. Remotes4Less
does not assume and is not responsible for any real or
consequential damages from claims against performance of
this remote, nor is it liable for any costs related to loss of life,
property, or revenue and will assume no costs of reinstallation
or removal.
© 2019 Remotes4Less All rights reserved.
Distributed by: Remotes4Less, Apple Valley CA USA www.remotes4less.com
Manufactured by: Giant Alarm System Co. Ltd. China
Compatibility List And Number Of Button Presses Needed
1 time
Linear® MegaCode 1997-Current 318MHz
2 times
Chamberlain®* Orange Button 1997-2005 390MHz
3 times
Chamberlain®* Purple Button 2005-Current 315MHz
4 times
Chamberlain®* Green Button 1993-1996 390MHz
5 times
Genie Overhead Door® Intellicode 2005-Current 315MHz
6 times
Genie Overhead Door® Intellicode 1995-Current 390MHz
7 times
Stanley® Security Code 1998 310MHz
8 times
Chamberlain®* Yellow Button 2011-Current 310/315/390MHz
9 times
Wayne Dalton® rolling code 1999-Current 372.5MHz
12 times
Genie® 12 Code Switch 1985 390MHz
13 times
Linear Multi-Code® 10 Code Switch 300MHz
15 times
Stanley Multi-Code® 10 Code Switch 310MHz
16 times
Genie® 9 Code Switch 390MHz
17 times
Linear Moor-O-Matic® 8 Code Switch 310MHz
*Access Master, Do-It, Gatheron, LiftMaster, Link Control, Master Mechanic, Raynor,
Sears Craftsman, Steel Craft, True Value are compatible with Chamberlain technology.
WARNING
To prevent possible SERIOUS INJURY or DEATH:
•
NEVER
allow small children near batteries
•
If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
•
Replace
ONLY
with 3V CR2032 coin battery.
•
DO NOT
recharge, disassemble, heat above 212°F
(100°C) or incinerate.
NOTICE:
To comply with FCC and or Industry Canada rules (IC),
adjustment or modifications of this transmitter are prohibited, except for
changing the signal learned or replacing the battery.
THERE ARE NO OTHER SERVICABLE PARTS.
Tested to comply with FCC Standards
FOR HOME OR OFFICE USE.
Operation is subject to the following two conditions: (1) this device may
not cause
any harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesirable operation.
Fig 3.
Fig 4.
