background image

Copyright © All Rights Reserved.   P-MU-

ML-210  Ver. C  Publish: 2010.12.02

4 - 1

ML-210 
ML-210-SW

Operating Voltage» ML-210: 12 or 24VDC

                               ML-210-SW: 12~24VDC/AC

Voltage Tolerance» ±10%

Current Draw» ML-210: 280mA/12VDC; 140mA/24VDC

                        ML-210-SW: 210mA/12VDC; 150mA/24VDC

Version Changeable» Fail-safe or Fail-secure  

Operating Temperature» -10~45°C

Humidity» 0~95% non-condensing

Lock bolt sensor switch output» SPDT rated 3A/125VAC

Solenoid testing» Tested to 1,000,000

!

cycles

Net Weight» ML-210: 540g / ML-210-SW: 555g

Just applicable to vertical installation

Double swing door

Unit:mm

Double Swing Doors

Electromechanical Lock

Installation Instruction

Specifications

Fixing Lug

Allen wrench (1.6mm)

Nib

Lock bolt

Strike Plate

Packing Contents

Template

Outswing

Inswing

Version Changeable:

Take out the Screw 1 , release the screw 2 , move the 
position and then tighten both screws.

“Fail-Safe” 

(Power to Lock)

“Fail-Secure” 

(Power to Open)

Caution:

Do not completely remove screw 2 (as marked in the figure) 
as the interior solenoid might fall off.

ø5.0

ø5.0

4-R2

25

210

33

253

30

38

150

206

22

Butt Splice (IDC) Connector

Using crimper or pliers and pressing the header of 
connector down to even position.

Cut on dotted line

Alignment CL

4 - 4

ø5.0

ø5.0

25

210

ø5.0

150

28

30

28

ø5.0

Unit:mm

Installation Instructions

Door Loop
(Optional)

The door loop protects the wiring 
from damage at the door hinge.

Attention! Please ensure that the 
template is the correct way up

Alignment CL

Fra

me

Do

or 

Le

af

ø5.0

ø5.0

Do

or L

ea

f

Cut out mortise holes for the lock 
body and strike plate and drill  

Tighten the fixing lugs with

Doo

r Le

af

Connect power cable to the lock
and test before screwing to the 

Affix the strike plate.

Copyright © All Rights Reserved.   P-MU-

ML-210  Ver. C  Publish: 2010.12.02

Doo

r Fr

am

e

Do

or

 le

af

Do

or F

ram

e

Do

or 

Le

af

Align the center line (CL) of the lock 
body template with the CL of the door 
leaf. Ensure the CL of the strike plate 
template matches the lock body CL as 
closely as possible.

holes according to the templates.

screws.

door leaf.

Отзывы: