Giabau FT-MAXI, Техническое руководство

Страница: 35 / 96

35 FT-M1211A
1/ Connect the blue wire to the 0v (4).
-the black wire to the pressure switch input
-the brown wire to the +24v (3)
2/ Set the pressure to 6 bars using the main pressure regulator.
3/ Press Edit .
Select OUT A and then press several times on Edit until SP.
Set SP to 5 bars (pressure switch trigger s) using the arrows.
Press Edit several times until the supply pressure is displayed.
ACCES CODE:
To enter the access code: Press Edit.
Select SPEC with the arrows.
Press Edit repeatedly until LOCK is displayed.
Enter the desired code.
Press Edit several times until the supply pressure is displayed.
OFF means that the keyboard is not locked with a code.
RESET:
If the access code is lost, a reset of the pressure switch is possible.
Disconnect the power supply.
Press the A, B (arrows) keys and Edit.
Connect the power supply again.
Readjust the settings.
Edit
FESTO SPAB PRESSURE SENSOR PROGRAMMING 14-1051