background image

Made in China

AXWVIM | REV 0919

©2019 GHOST CONTROLS

®

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

 

This device may not cause harmful interference

 

This device must accept any interference received, including interference that may cause undesired operation.

   WARNING                                                                                                      G                                                                                                   

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to 

operate the equipment.

FCC ID: 2AGMZGC433WV1

    NOTE                                                                                                                                                                                                                       

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. 

WARRANTY:

GHOST CONTROLS

®

 Vehicle Sensors are warrantied for 18 months with proof of purchase. An additional 6 month warranty 

is available at NO COST if you register your product within 30 days of purchase on 

ghostcontrols.com/register

. See warranty 

terms on 

ghostcontrols.com/warranty

For more information on GHOST CONTROLS

® 

Automatic Gate Openers and Accessories please visit our website at 

ghostcontrols.com

.

Содержание AXWV







Отзывы: