Changing Channel on Transmitter
Power on the Transmitter
Changing the Channel on Receiver
Power on the Receiver.
User Manual
© 2017 Cine Gears INC. All Rights Reserved.
11
Scanning Channels
Press “OK” on the receiver for 3 seconds.
Monitor will read “Scanning...”
Monitor will read suggested channels for optimal transmission (i.e. “recommended channel 3”)
In 10-20 seconds transmitter and receiver will relink and video will be shown on the monitor.
Mute and Call on Intercom
Press “Mute” button on the receiver to open communication between transmitter and receiver.
When communication is open, “Mute/Call” light will not glow.
Press “Mute” button on the receiver again to mute communication. When communication is muted,
“Mute/Call” light will glow red.
Intercom communication may only be opened or muted via the receiver. However, while
communication is muted, user may press “Mute” button on the transmitter and the “Mute/Call”
light will begin flashing on both units to alert the user on the receiver’s end that they wish to talk.
On both the receiver and the transmitter, push “VOL” up or down to increase or decrease the
volume.
Display Transmission Information
Press “CH” on the receiver for 3 seconds.
Transmission information will be displayed on the monitor.
To dismiss information, press “CH” on the receiver for 3 seconds again.
Press the “CH” button to unlock channels, then press “CH” to scroll through channels.
Press “OK” to confirm.
Transmitter channel setting accomplished.
Receiver channel setting accomplished.
Press “CH” to confirm.
Press “OK” button to unlock channels, then press “OK” to scroll through channels.