
If you need to erase all access pins, except Master PIN, in the keypad, then you must complete the following
procedure. After completing these steps, your Master PIN is still valid for programming.
Erase ALL Access Pins (Use this function cautiously since all permanent and temporary access pins will need
to be reprogrammed.)
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
1
Press and Release
Puts the Keypad into Programming Mode.
2
Enter
Master Pin
Completing this step actually allows you into
programming mode. Without the correct
Master Pin, then you will not be able to
proceed further.
3
Press and Release
This tells the keypad that you are going to do
program a special feature into the keypad.
4
Enter 09
Code 09 tells the keypad that you would like
to erase ALL access pins stored in memory.
Once this step is completed, you will need to
reprogram all pins into the keypad.
5
Press and Release SEND
Completes the programming sequence for
this feature and exits the keypad back to
normal operation.
NORMAL USAGE FOR ALL PINS (MASTER, PERMANENT, OR TEMPORARY)
Open or Close the Gate
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
1
Enter
valid access pin
or
or
This is the four digit PIN that all users will
be entering to gain access to the property.
2
Press and Release SEND
SENDs the command to open, close, or stop
to the Main Gate Controller.
PartyMode
®
Step Button(s) Sequence to Press
LED/Alarm
After Pressing
Description
1
Press and Release
This tells the keypad that you want to enable
or disable PartyMode
®
for your automatic
gate opener system.
2
Enter
Master Pin
Completing this step actually allows you
to enable this feature. Without the correct
Master Pin, then you will not be able to
proceed further.
3
Press and Release SEND
This transmits the GhostCode signal to the
main gate controller.
PartyMode Secure™ and 1Key™ both utilize the same key on the keypad and are dependent on how your main
gate controller is programmed. These functions were designed to allow your keypad to operate just like a
remote transmitter.
PartyMode Secure™ is an ideal solution if you have pets that you need to keep contained within your property
while allowing access to visitors because it will allow guests to touch any number key on the keypad to open the
gate and then AutoClose will automatically close your gate to contain your animals.
PartyMode Secure™
(Requires AutoClose to be
enabled
on Main Gate Controller.)
Step Button(s) Sequence to Press
LED/Alarm
After Pressing
Description
1
Press and Release
This tells the keypad that you want to
enable or disable PartyMode Secure™ for
your automatic gate opener system. Your
main gate controller must already have
AutoClose enabled. If you do not have
AutoClose enabled, you are actually putting
the keypad into 1Key operation.
2
Enter
Master Pin
Completing this step actually allows you
to enable this feature. Without the correct
Master Pin, then the keypad will not enter
into PartyMode Secure™ operation and will
revert back to normal operation.
1Key™ is an easy solution to turn allow your keypad to operate just like your remote transmitter button to open
or close your gate. This feature is also a simple weather resistant solution to allow exit from your property if you
do not use a vehicle sensor.
1Key™
(Requires AutoClose to be
disabled
on Main Gate Controller.)
Step Button(s) Sequence to Press
LED/Alarm
After Pressing
Description
1
Press and Release
This tells the keypad that you want to enable
or disable 1Key™ for your automatic gate
opener system. Your main gate controller
must already have AutoClose disabled.
If you have AutoClose enabled, you are
actually putting the keypad into PartyMode
Secure™ operation.
2
Enter
Master Pin
Putting the system into VacationMode™ will cause all GhostCode signals to be ignored from your remote
transmitters. It will also cause all signals from your keypads,except the command to be removed from Vacation-
Mode™, to be ignored. This feature is a solution to prevent all users from operating your automatic gate opener
system.
VacationMode™ (ZombieMode™)
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
1
Press and Release
2
Enter
Master Pin