GHM Delta OHM HD32.3TCA, Руководство по эксплуатации

Страница: 34 / 46

HD32.3TC
- 34 -
V1.1
•
The sensor of AP3203 and AP3203.2 probes is heated. In case of vapours or
gases, a fire or an explosion could be triggered. Do not use the probe in the
presence of flammable gases. Make sure that in the environment where the
measurement are made there are no gas leaks or potentially explosive va-
pours.
•
The probe is fragile and must be handled with extreme care . A simple shock can make
the probe unusable.
•
After finishing the measurement, the sensor placed on the probe head must be protected with
the provided threaded protection cylinder.
•
During the use, the probe must be protected with the proper spherical metal grid.
•
Do not touch the sensor.
•
For cleaning the probe use only distilled water.
General warnings
•
Some sensors are not isolated from the outer sheath; take great care not to come
into contact with live parts (above 48 V): it could be dangerous for the instrument
and for the operator who could be electrocute.
•
Do not expose the probes to gas or liquids that could corrode the probe material. After the
measurement, clean accurately the probes.
•
Respect the correct probes polarity.
•
When inserting the probes connector into the instrument, do not fold or force the contacts.
•
Do not bend, deform or drop the probes: they can be irreparably damaged.
•
Use the probes suitable for the type of measurement to be performed.
•
For a reliable measurement, avoid too rapid temperature variations.
•
Avoid measuring in presence of high-frequency sources, microwave or high magnetic fields,
as they would be unreliable.