![GHM-Martens TS125 Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/ghm-martens/ts125/ts125_operating-manual_2220478004.webp)
GHM Messtechnik GmbH – Martens
Kiebitzhörn 18
● 22885 Barsbüttel ● Germany
Phone +49-40-670 73-0
● Fax
-288
www.ghm-messtechnik.de
●
4
Any processes described in this operating manual may only be carried out by
trained, qualified personnel who are authorised by the owner and wearing
protective clothing. All rights reserved.
1.1.
Safety signs and symbols
Warning notices are identified in this document as described under Table 1:
DANGER
Warning! This symbol warns of imminent danger which can
result in death, severe bodily injury, or severe property damage
in case of non-observance.
Attention! This symbol warns of potential dangers or harmful
situations which can cause damage to the device or to the
environment in case of non-observance.
Note! This symbol indicates processes which can have a direct
influence on operation or can trigger an unforeseen reaction in
case of non-observance.
1.2.
Safety instructions
Read the product description before commissioning the device. Ensure that there
are no limitations for use of the product for the relevant applications.
The owner is responsible for ensuring the fault-free operation of the
device. The owner is obligated to ensure compliance and to observe
the required work and safety measures of the current applicable
regulations for the entire duration of use.
1.3.
Product liability and warranty
Exclusion of liability:
The contents of the operating manual have been checked to ensure conformity
with the described device. However, deviations cannot be entirely ruled out.
Therefore, we cannot assume any guarantee for complete conformity. The
specifications in this document are checked regularly and any necessary
corrections are incorporated into subsequent versions. This document is subject
to technical changes. In addition, all claims are based on the valid 'Standard
Terms for the Supply of Products and Services of the Electrical Industry'.
GHM Messtechnik GmbH cannot inspect or repair any devices without
the required form having been filled in completely (refer to page 16
'Returns').
DANGER