8
12 MAINTENANCE PROCEDURES
In case of troubles, contact the technician for the inspection and, if necessary, for unscheduled maintenance.
Periodically it is necessary to carry out the following procedures:
OPERATIONS
HOURS OF WORK
Empty the boiler
150
This machine does not require special equipment for check and maintenance operations, but use suitable tools and
personal protection in compliance with D.Lgs. 626/94 and in good condition (DPR. 547/55) in order to avoid harm
to people and to parts of the machine.
Prior to carrying out any inspection or work on the machine, make sure that it is disconnected from the
main electrical supply.
13 DISPOSAL
During the maintenance operations, or in case of demolition, do not litter the environment with polluting elements.
Refer to the local laws in force for appropriate disposal. In case of demolition, it is necessary to destroy the
identification rating plate and any other document.
14 HOW TO ORDER SPARE PARTS
For the spare parts request it is necessary to quote the model of the machine, the serial number, the quantity of the
spare parts requested and their code number. (This data is available on the rating plate, the technical data and on
the operating instructions.)
If the voltage and frequency of the electrical parts to replace are not V220-380/50Hz (check these particular
characteristics on the rating plate of the part to replace), quote the right data.
The technical data, the descriptions and pictures included in this manual are not binding. The manufacturer
reserves the right to make any necessary modification without notice and without updating these operating
instructions.
15 HANDLING AND TRANSPORT
Before its transport the machine is carefully packed in a wooden cage. During the transport and the stocking
operations, pay attention to warnings printed on the packaging. At the moment of the delivery, check that the
packing is intact and put the machine in a dry place.
16 WARRANTY
All Ghidini products are supplied with a guarantee for materials and manufacturing failures for a period of maximum
12 months from the date of the delivery.
The guarantee is extended as follows:
In case of malfunction of the machinery contact Ghidini and quote the trouble, the model, serial number and the
operating conditions of the machine. Upon receipt of the machine and after an accurate analysis, Ghidini
reserves the right to repair or to replace the product. If the machine is still under guarantee, Ghidini. will repair or
replace it free of charge, but if the returned product is not defective, Ghidini reserves the right to charge the freight
to the customer (transport, etc.).
This warranty must be considered annulled in case of damages caused by incorrect use, negligence, wear and
tear, chemical corrosion, or installation contrary to the operating instructions supplied by Ghidini. Any eventual
modification or different use of the machine must be previously authorized by Ghidini through a written document,
otherwise Ghidini may be considered free even from the guarantee bond.
The parts of the machine which are subjected to wear and tear are not included in the guarantee as well as all the
items not explicitly cited, or damages and expenses caused by the defects of the product itself. Implicitly the
customer accepts the conditions of the present warranty upon purchasing the machine. Eventual modifications to
the guarantee must be authorized by Ghidini through a written document.
Содержание SIMBA Mini
Страница 7: ...7...
