Ghibli Wirbel 909 PLUS, Использование и обслуживание

Страница: 14 / 88

IT EN
EN - 2
Switching on the appliance
- Insert the plug (10 Fig. 9) into the sock-
et.
- Set the switch (11 Fig. 10) to “ I ”. The ap-
pliance starts up: the light on the switch
comes on.
N.B.
The suction force can be adjusted using the
selector (12 Fig. 11) located on the ergonom-
ic handle (6 Fig. 11).
Opening up the window (13 Fig. 11) gives
lower suction power.
Using the telescopic tube
(if present)
- The length of the telescopic tube (14 Fig.
12) can be adjusted as follows:
- To lengthen the tube, press down on the
ring nut (15 Fig. 12) and simultaneously
extract the top part (16 Fig. 12) of the
tube. Once the required length has been
obtained, release the ring nut (15 Fig. 12)
the tube will lock into the nearest locking
position;
- To shorten the telescopic tube, use one
hand to push the ring nut (15 Fig. 12)
down and the other to reinsert the top
tube (16 Fig. 12) into the lower sleeve (17
Fig. 12).
Switching off the appliance
- Set the switch (11 Fig. 10) to “ 0 ” to switch
off the appliance. The light on the switch
goes off.
- Remove the plug (10 Fig. 9) from the
socket.
- Couple the tube (7 Fig. 13) to the joint.
CLEANING AND
MAINTENANCE
DANGER:
Before performing any maintenance,
unplug the appliance from the mains.
Removing and replacing the paper
dust bag.
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor.
- Remove the polyester filter (3 Fig. 3).
- Remove the paper dust bag (4 Fig. 4) and
replace it as described previously.
- Reassemble everything proceeding in re-
verse order compared to assembly.
Checking and cleaning the polyester
filter
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor.
- Remove the polyester filter (3 Fig. 3).
- Clean the filter (3 Fig. 14) from the inside
out with a blast of air. The filter (3 Fig. 14)
can be washed in warm water but must
only be replaces when completely dry. If
it is too dirty, replace it.
- Reassemble everything proceeding in re-
verse order compared to assembly.
Cleaning the appliance body
- Clean the appliance body using a cloth
dampened with water or mild detergent.
DANGER:
Do not wash the appliance using jets of
water.
SPARE PARTS
Pack of 5 paper filter bags Code MK-042
Polyester filter Code 20-214