Ghibli & Wirbel Round 45 Touch 45D55, Использование и обслуживание

Страница: 14 / 32

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 8
50) Button with double function - Aspira-
tor start and Quiet operation
“ ”
Starting the aspirator
Pressing the switch (50) “ ” it starts the
aspiration to silent. Pressing the switch
(50) “ ”, you switch from silent to stand-
ard mode, the display shows the symbol “
”.
WARNING:
The suction motor will start only by
touching the touch sensor. To turn off
the suction press the button (50). The
turbine will continue to operate for a
few seconds so as to aspirate the liq-
uid present on the floor, after which it
will automatically turn off. The display
will disappear the symbol “ ”.
Quiet operation
“ ”
It lights up the icon “ ” silent mode, for
starting the engine, you have to touch the
touch sensor (20).
51) Water solenoid valve button “ ”
Button operation is enabled by pressing
the button (45) “ ” and button (52) “
”.
By pressing the button (51) “ ”, on the
display will be shown the symbol “
”, and the opening of the water valve is
being prepared. The operation thereof is
controlled by the touch sensor (20).
By repeatedly pressing the button (51) “
” the amount of water is increased;
once the maximum amount is reached,
the display will show the symbol ” ”;
pressing the button (51) again will deacti-
vate the function.
52) Brush rotation enable button “ ”
Button operation is enabled by pressing
the button (45) “ ”.
Pressing the button (52) “ ”, will en-
able the rotation of the brush/es; the
display will show the symbol “ ”. The
operation of the brush/es is controlled by
the touch sensor (20).
To stop brush rotation, press the button
(52) “ ”.
49) Chemical agent dosing button (op-
tional)
By pressing the button (49) “ ” the dis-
play will show the symbol “ ” activating
the operation of the chemical agent dos-
ing pump.
By repeatedly pressing the button (49) “
”
the amount of dosed chemical agent
is increased; once the maximum amount
is reached, the display will show the sym-
bol “ ” ; pressing the button (49) again
will disable the function.
53) ECO “
ECO
” button
Pressing the “
ECO
” the parameters of
water, chemical and suction mode as-
sume the following values.
- Water the second mark..
- Chemical 0,2%.
- Aspiratin silent mode.
Pressing the button “
ECO
”again, these
parameters return to their initial settings.
6.2 WORKING CYCLE EX-
AMPLE
(Fig. 9)
Setting a washing cycle with brushes and
drying.
- Press the button (51) to allow the water
supply.
- Press the button (52) to allow brush rota-
tion.
- Press the button (50) and the vacuum will
start.
MAN_ROUND45TOUCHECO_ed_02-2018_49026000.indd 8 28/02/18 11:38