Ghibli & Wirbel AS 2 MIKROS, Использование и обслуживание

Страница: 10 / 16

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 2
usinG The uniT
- The appliance is fitted with wheels and
can therefore be pulled along during use
using the hose.
- To lift it up, use the handle (11 Fig.7) on
the top of the cover. Starting up the appli-
ance
starting-up the unit
- Insert the plug (12 Fig.8) into the socket.
- Press the switch (13 Fig.9). The appli-
ance starts up.
NOTE:
You can adjust the suction force by sliding
the selector (14 Fig.10) found on the ergo-
nomic handle (8 Fig.10).
The suction force is decreased by opening
the window (15 Fig.10)
Turning the unit off
- Press the switch (13 Fig.9) to switch off
the appliance.
- Remove the plug (12 Fig.8) from the
socket.
- Wind up the cable (16 Fig.11) and hook it
into position then attach the suction tube
(17 Fig.11) in position
cleaninG anD
MainTenance
haZarD:
The plug must be removed from the sock-
et before any maintenance procedure is
implemented.
removing and replacing the paper fil-
ter bag
- Release the levers (1 Fig.1) and remove
the cover (2 Fig.2) complete with the mo-
tor and the cartridge filter (3 Fig.2).
- Remove the paper filter bag (4 Fig.3) and
replace as indicated above.
- Reassemble everything proceeding in re-
verse order.
Checking and cleaning the filter cartridge
- Release the levers (1 Fig.1) and remove
the cover (2 Fig.2) complete with the mo-
tor cartridge filter (3 Fig.2).
- Unscrew the central screw (18 Fig.12)
and remove the cartridge filter (3 Fig.12).
- Clean the filter (3 Fig.13) from the inside
out with a jet of air. If this is too dirty, it
must be changed.
- Remount all the parts by following the re-
verse procedure of the dismantling proc-
ess.
checking the exhaust air filter
- Release the filter (19 Fig.14) and remove
it from the appliance.
- Make sure the filter is not clogged. If it is
too dirty, replace it.
- Remount all the parts by following the re-
verse procedure of the dismantling proc-
ess.
cleaning the unit body
- Clean the unit body with a cloth damp-
ened with water or a neutral detergent.
haZarD:
Do not wash the unit with jets of water.
sPare ParTs
Pack 5 paper filter bags Code MK-042
Cartridge filter Code MK-016
HEPA Filter Code MK-041
Manuale AS2-8050826_1ed_04-2017.indd 2 26/04/17 10:41