GHARiENi Gharieni MLX Quartz, Инструкция по эксплуатации

Страница: 27 / 48

26
Fig. shows stand-by mode after cool-down phase has been completed
NOTICE! An active program can be cancelled.
4.
Cancel program:
If one of the programs is already active, but you want to start the other
program, for example, you can cancel the active program at any time by
touching the corresponding button on the glass operating panel again.
If the program is interrupted prematurely within the first minute of the
program running time, the
cool-down phase
is skipped, and the other program
can be started. However, if the program is interrupted after the first minute, the
6-minute cool-down phase must be waited for.
The 360 seconds are displayed in the status bar and run down to 0, this is
shown in blue letters. After the cool-down phase, the system returns to stand-by
mode (s. fig.). The red lock in place of the symbols for the two programs
disappears. Now a program can be started again.
5. Manual control of the air cushions:
In addition to the two programs, the air cushions can be controlled manually
(s.fig.). The status of the air cushion is visualized by up to five horizontal bars in
the area for the respective air cushion (s. fig.).
After 2 seconds the second bar appears, after 4 seconds the third, after 6
seconds the fourth and after 8 seconds the fifth bar.
When all five bars are visible, the pump stops.
Further inflation is not possible. Now the air can only be released.