GGTR Ampere Full Circle, Руководство пользователя

Страница: 3 / 5

Charging Full Circle
Unravel plugged in with Full Circle on top of unravel, it will
charge wirelessly, just like a phone
When you receive Full Circle, it will be approximately 25%
charged. So, the first thing you should do is power it up. You
can charge Full Circle with either a USB-C cable or by placing it
on a Qi-enabled wireless charger. Ampere wireless chargers
have been designed to charge Full Circle at the fastest possible
speeds. When all the LEDs are illuminated, Full Circle is 100%
charged, and you are good to go.
Wireless Charging
Ensure that your device is Qi-enabled before attempting to
wireless charge any devices. Align the charging receiver on
your device with the center of Full Circle on the center of the
circle. Full Circle is designed to work with your device in both
horizontal and vertical alignments to work as a phone stand
on the table or to secure your phone in place while on the go.
Gently pull each of the four elastic bands over the corners of
your phone to hold it in place.
Using Full Circle to Power
Your Devices
• To begin charging, press the power button. If you remove
your device then place it back on Full Circle within 10
minutes, it will charge automatically. After ten minutes, you
will need to press the button to begin charging again.
• You can wirelessly charge and discharge at the same time.
Place Full Circle on a wireless charger and your device on
Full Circle. (Note: The power needs to be at least 20% and
the USB-A and USB-C ports will not work)
• You can wirelessly charge a device at the same time as using
the wired output. However, when using both, the wired
output will take priority and the wireless charging may slow
down.
• When charging Full Circle via the USB-C port, you can use
both the USB-A output and the wireless charging output.
• You cannot use charge Full Circle using the wired USB-C input
and the wireless input at the same time. In this
circumstance, the wired USB-C input will take priority.
Notes on Wireless Charging
You can also charge your wired-charging device using Full
Circle’s USB-A or USB-C output ports. Simply plug in your
device to charge -- when charging with the ports, charging will
start automatically. When your device is fully charged, the
charging will stop automatically. To turn off charging, press
the power button once.
Wired Charging
USB-C Input
& Output
USB-A
Output
• When using USB-A only, the power will be MAX 5V/3A
• When using the USB-C only, the power will be PD 18W
• The USB-A port and the USB-C port share a 5V/3.4A output
-- Full Circle will intelligently determine the power
allocation.
• You cannot use the USB-A port while wirelessly charging
Full Circle and wirelessly charging a device on full circle.
Notes on Wired Charging