4
MM
4
EN
2. Explanation of Symbols on the Machine
For safe operation and
maintenance, symbols are carved in relief on
the machine.
According to these indications, please be
careful not to make any mistake.
The port to refuel “MIX GASO-
LINE”
Position:
Fuel cap
The port to top up chain oil
Position:
Oil cap
Setting the switch to the “I”
position, the engine starts.
Setting the switch to the “O”
position, the engine stops
immediately.
Position:
Front at the top of
the rear handle
Starting the engine. If you pull
out the choke knob (at the
back-right of the rear handle)
to the point of the arrow, you
can set the starting mode as
follows:
• First-stage position – start-
ing mode when the engine is
warm.
• Second-stage position –
starting mode when the
engine is cold.
Position:
Upper-right of the
aircleaner cover
!
WARNING!
The screw under the “H”
stamp is The High-speed
adjustment screw.
The screw under the “L” stamp
is The Slow-speed adjustment
screw.
The screw at the left of the “T”
stamp is the Idle adjustment
screw.
Position:
Left side of the rear
handle
Shows the directions that the
chain brake is released (white
arrow) and activated (black
arrow).
Position:
Front of the chain
cover
If you turn the rod by screw-
driver follow the arrow to the
"MAX" position, the chain oil
flow more, and if you turn to
the "MIN" position, less.
Position:
Bottom of the
power unit
2. Explanation of Symbols on the Machine
