GGM gastro GGM-BRG01-E15-0001, Руководство пользователя

Страница: 6 / 14

6
- No control circuit should be connected to the supply line of the device.
-
Cables that carry the sensor and input signals to the device should be carried as far as
possible and separately from the supply, control, switched inductive load cables and they
should be prevented from being affected.
- Necessary precautions should be taken to prevent liquid leakage and metal parts to become
conductive into the device. Otherwise, accidents such as fire and electric shock may occur.
C
– SAFETY INSTRUCTIONS
- This device must be installed in accordance with current regulations and used only in
a well-ventilated area. Consult instructions for setting up the device and before use.
-
The device is made for industrial use and should only be used by personnel trained in
the device
.
- Do not interfere with the device without using appropriate protective equipment.
-
Keep the device cable away from hot surfaces.
-
For the long lasting of the device, never run it idle for a long time. When the device is
not used, it must be turned off. In long-term use, the device should be turned off and
rested for at least 10 minutes every 4 hours.
-
All kinds of flammable solid liquid materials (clothes, alcohol and derivatives, petro-
chemical products, wood and plastic materials, curtains, etc.) should never be kept in
the area where the device is operated.
-
Because of any reason if there is a fire or flame flare where the appliance is used, turn
off all gas valves and electric contractor switch quickly and use fire extinguisher.Never
use water to extinguish the fire.
- Damages caused by lack of grounding connection will not be covered under warranty.
- Do not use non-original spare parts on the device. In case you use for the device spare
parts not supplied by our company, the device will be out of warranty.