GGM gastro BD-32, Инструкция по эксплуатации

Страница: 12 / 13

Do not modify the power cord under any circumstance to allow the unit to be plugged into a
non-grounded outlet. To avoid heat damage to the power cord, please ensure that it does not
come in proximity or in direct contact with the compressor of the refrigerator.
Please avoid installing the refrigerator in a location where the appliance will come in contact
with water or moisture to minimize rusting of metal parts.
The freezer should not be installed near any heat source or in a location where it will come
in direct contact with the sunlight.
TROUBLESHOOTING GUIDE
WHAT TO DO …
When the fridge is not in use for a prolonged period:
 Remove the plug from the outlet.

Remove all contents from the fridge.
 Dry the interior and leave the door open for a few days.
When the freezer does not work:

Check if there is a power failure
 Check if the power plug is plugged into the power outlet

Check that the fuse has not blown in main supply circuit
When you wish to move the fridge:
 Secure all movable parts and contents. (Package them separately if necessary.)
 Transport the fridge only in an upright position. In any other position you may damage the
compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
If the freezer seems too warm inside:

Check to see that the door is closing properly and the door seal is not damaged.
 Check that the interior circulation is not obstructed by having too many goods stored. (The
fridge is overloaded)
 Did you store anything hot, without first cooling it to room temperature?
 Is there sufficient clearance around all sides and above the fridge?
When the freezer is cooling excessively:

The temperature control dial may be set too high
 If you place food sorts which contain a lot of moisture directly under the cool outlets, they will
freeze easily. This does not indicate a unit malfunction.
When the defrosting water overflows inside the refrigerator and onto the floor:

Check that the drain pipe and the drain hose are not clogged.

Check that the drain pan is housed properly.