Page 2 of 7
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
•
This product is intended for a maximum weight of
50
kg.
•
Due to the size of this product we recommend that it is assembled in the room intended for
use.
•
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
•
Check the pack and make sure you have all the parts listed.
•
Ensure that this product is fully assembled as illustrated before use.
•
Check all screws or bolts are tightened and inspect regularly
•
Tools not included.
WARNINGS
•
This product should only be used on firm, level ground.
•
Keep small parts out of reach of children.
•
Make sure the legs remain in contact with the ground.
•
Do not use power tools to construct this product.
•
Do not tighten screws until fully assembled.
•
Do not over tighten screws or bolts.
•
Do not use this product if parts are missing, damaged or worn.
•
Do not sit or stand on the product.
CARE INFORMATION
•
Never use scourers, abrasives or chemical cleaners.
•
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
Do not exceed this weight.
OTTAWA 4-DRAWER CHEST ASSEMBLY INSTRUCTIONS
•
It is essential that this unit is fixed to a wall with the fixings provided
•
Batch No.: WMI 141036
We recommend the use of the wall fixing provided for safety reasons. N.B. If in doubt
please consult a qualified tradesperson. Warning: Always ensure the area to be drilled
is free from hidden electrical wires, water and gas pipes.
