Gfp 663TH
April 2021
33
20. Rewind Assembly
The unit comes with two rewinds: one upper and one lower rear rewind.
1. The rewind shaft described in Sect 17 above, is a drop-in shaft and is used to take up the
release liner of the overlaminate.
2. The lower rear rewind, seen below, is a swingout shaft and is used to rewind the web for
roll-to-roll applications. This rewind also contains two side slitters for trimming the sides of
the web. Extra side slitters can be added for multiple side slitting.
Locking Cradle
Rotating Blade Pressure Adjustment Thumbscrew
Nylon Guide Bar
Locking Thumbscrew
Left Slitter Head
Right Slitter Head
