Gfp 663TH
April 2021
22
current job if the prior job is cleared first. Failure to do so will only add the previous job to
the current one.
To input the starting length press, Start Length and use the Finger Slide starting at the bottom
and sliding up. You may use the +/- keys to fine tune the number, then press OK to confirm.
11Cix. Printer
Pressing PRINT brings you to this screen. You can set the date, type of film, finish of the
film and the time of day. The amount of film used on the current job will be displayed in
Length.
To set the date: Press each key, one at a time, then toggle b/- to the desired number.
To set the time: Press each key, one at a time, then toggle b/- to the desired number,
press SET.
To input the different types of films and finishes, press the corresponding Edit key. A
keyboard will pop up allowing you to create what you want. You can create up to 10 different
types of films and finishes.
Once you have the types you need, to choose between them , press that key and us the +/-
keys for the desired type.
