Gfp 230 C
June 2012
4
3.
Installation Safeguards
•
Shipping damage should be brought to the immediate attention of the
delivering carrier
•
Avoid locating the laminator near sources of heat or cold. Avoid locating the
laminator in the direct path of forced, heated or cooled air
•
The receptacle must be located near the equipment and easily accessible.
•
Connect the attachment plug provided with the laminator to a suitably
grounded outlet only. This machine must have reliable earth wire to ensure
the safety of the machine during operations
•
Contact an electrician should the attachment plug provided with the laminator
not match the receptacles at your location
•
Ensure that the voltages of the power supply you are using match the
rated working voltages before operations. Do not use incorrect power supply
•
Do not use damaged wires or sockets. If abnormal conditions occur,
switch off the power supply first.
•
Only a licensed electrician should install wiring and outlet for the
laminator
•
Do not defeat or remove electrical and mechanical safety equipment such as
interlocks, shields and guards
