3.
Functional Parts of the Camera
Lens
Buzzer
Mode button
LCD
Viewfinder
Battery Door
USB
Shutter button
Shutter button
4.
Get started
1.
Load battery to the correct polarity marked on the battery door.
2.
Turn the camera on by pressing MODE button.
Precaution:
While the camera is connected to the USB cable, it is unnecessary to
use the battery since the camera uses the power supplied from
computer USB interface.
Before using the PC-Cam function, please download all photos in the
camera onto your computer to avoid any photos missing.
Warning:
1.
If you don’t use the camera for a long time, please take out the
battery. Photos will be lost after the battery is taken out.
2. Please follow local regulations when disposing of used batteries
3. If the camera is not used in 30 seconds. It will enter standby mode
automatically to save battery energy. You may press mode button
to restart the camera operations again.
5.
Software installation
Attention:
Make sure you install all the necessary software in your computer
before you connect the camera to a computer.
1.
Close all opened software applications on your computer before
installing the software.
2.
Insert the CD-ROM into the computer CD -ROM drive
3.
The CD user interface screen will automatically launch.
4.
Click on the Install Digital Camera Driver icon to install camera
driver first.
5.
If you want to install the application software of Arcsoft Photo
Impression and video impression included in the CD, click on the
Install Photo Impression or install video impression icon to install it.
Note: 1.Please install DirectX9 before the installation of video
impression.
2. If the setup screen doesn’t appear after loaded the CD, then
you can manually start it by double-clicking the “My Computer”
Icon on your desktop, then double click the icon for the
CD-ROM drive.
Shutter button
/Execute Mode