Lens
Buzzer
Mode button
LCD
Viewfinder
Battery Door
USB
Shutter button
Shutter button
Get started
1.
Load battery to the correct polarity marked on the battery door.
2.
Turn the camera on by pressing MODE button.
Precaution:
While the camera
is
connected
to the USB cable, it is unnecessary to use
the
battery
since the camera uses the power supplied from computer USB interface.
Before using the PC-Cam function, please download all photos in the camera onto
your computer to avoid any photos missing.
Warning:
1.
If you don’t use the camera for a long time, please take out the battery. Photos
will be lost after the battery is taken out.
2. Please follow local regulations when disposing of used batteries
3. If the camera is not used in 30 seconds. It will enter standby mode automatically
to save battery energy. You may press mode button to restart the camera
operations
again.
Software installation
Attention:
Make sure you install all the necessary software in your computer before you
connect the camera to a computer.
1.
Close
all opened software applications on your computer before
installing
the
software.
2.
Insert the CD-ROM into the computer CD -ROM drive
3.
The CD user interface screen will automatically launch.
4.
Click on the Install Digital Camera Driver icon to install camera driver first.
5.
If you want to install the application software of Ulead photo Express included in
the CD, click on the
Install Photo Express 4 SE
icon to install
it.
Important:
For Windows98, Microsoft® DirectX 8.0 or a higher version is required to be
installed before driver installation. If there is not DirectX 8.0 in your PC, please
install it first. The DirectX 8.0 is included in the CD supplied under the “DirectX”
folder, your can run the
dxsetup.exe
to install it.
If the XP warning dialogue box pop up during driver installation, please click “Yes”
button to continue.
Camera function operation
If the MODE button is pressed
repeatedly
, the camera LCD display will show the
following symbols: