GFE Speedy Spread, Руководство оператора

Страница: 5 / 44

Raven 460 Granular Quick Guide
1. Enter Boom Width. 600” for Fertilizer and 480” for Lime.
2.
Enter the product density in the “Meter Cal” location on the console.
3.
Enter the gate calibration number. Depress and hold “Meter Cal” for about 5 seconds
until the display flashes. Depress the Self Test button to add a decimal point. Enter
your gate calibration number.
4.
Enter your desired rate in the rate 1 or rate 2 location on the console.
Raven
Distance Calibration
Quick Guide
Mark off 400 feet in a straight line.
Position truck at the first marker of the 400-foot path.
Press the
Distance key. Enter 0 for the distance.
Drive the 400-foot path at a constant speed. Stop at the end of the 400-foot path. The
console will show you a number that is close to 400 feet; it may be over or under.
To get the new calibration number use this formula.
400 / number showing on console x Current Speed Cal = the new cal. Number
Input this number as the new Speed Cal number.
*Note* For the Tee-Jet GPS speed sensor use a starting Cal # of 606