GFA ELEKTROMAT SE 7.32 WS-25,40, Руководство по установке

Страница: 15 / 16

15
10 Declaration of incorporation / conformance
Declaration of incorporation
in the terms of Machinery Directive 2006/42/EC
for partly completed machinery, Appendix II Part B
Declaration of conformity
in terms of EMC Directive 2014/30/EU
We, the
GfA ELEKTROMATEN GmbH & Co. KG
hereby declare that the following products are conform with the above
EC Guideline and are only intended for installation in door equipment.
SE 7.32 WS-25,40
Standards applied
DIN EN 12453
DIN EN 12604
DIN EN 60335-1
DIN EN 61000-6-2
DIN EN 61000-6-3
Doors - safety in use of power operated doors
Doors - Mechanical aspect
Safety of household and similar electrical appliances
Purposes - Part 1 : General requirements
Electromagnetic compatibility (EMC) Part 6-2
Generic standard – Immunity standard for industrial environments
Electromagnetic compatibility (EMC) Part 6-3
Generic standard – Emission standard for residential,
commercial and light-industrial environments
We undertake to transmit in response to a reasoned request by the appropriate regulatory
authorities the special documents on the partly completed machinery.
Authorised representative for the compilation of the relevant technical documents
(internal EU address)
Dipl.-Ing. Bernd Synowsky
Documentation representative
Incomplete machines within the meaning of the EC Directive 2006/42/EC shall only be intended to
be integrated into other machines (or into other incomplete machines/systems) or to be assembled
with them to form a complete machine within the sense of the Directive. Therefore, this product
cannot be commissioned before it is determined that the entire machine/system to which it was
integrated shall comply with the provisions of the Machinery Directive indicated above.
Düsseldorf, 24.11.2015 Stephan Kleine
CEO Signature