3-1
6
l
warning - perSOnal
inJury HaZarD:
Be sure i.V. rod is inserted completely
into socket up to the arrow before applying
any load.
3.10.1 putting iV rod in up position
grasp i.V. rod and rotate upward until it stops.
push down on i.V. rod until it slides firmly into
rod hinge socket (see Figure 3-32).
3.10.2 extending iV rod
refer to Figure 3-32.
1. rotate screw collar, or large screw collar,
until loosened adequately to allow inner
tube to easily slide up or down within
outside tube.
2. lift up on top of i.V. rod until desired height
is achieved.
3. tighten collar screw(s) until hand tight.
3.10.3 retracting iV rod
refer to Figure 3-32.
1. Support extended portion of i.V. rod
with one hand.
2. rotate screw collar until loosened.
3. lower i.V. rod until desired height is
achieved, then retighten screw collar.
4. repeat process with second screw
collar as required.
Operating inStruCtiOnS
3
3.10 perManently MOunteD iV rOD OperatiOn
Figure 3-32
StainleSS Steel
Bag HOOK
SCrew COllar
large
SCrew
COllar
OutSiDe
tuBe
rOD
Hinge
