11
Signet 9950 Conductivity Transmiter
ENTER
4
DATE FORMAT
100% SOLUTION
NAME
SAVING
24 HOUR
AM/PM
GERMAN
LANGUAGE
LANGUAGE
00:00:04
0
AM/PM
09:11:04
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD
LANGUAGE
LANGUAGE
02/25/2016
2
AM/PM
02/25/2016
99.999
99,999
OR
ENTER
saves
changes
ENTER
METRIC
U.S. CUSTOMARY
LOOKING FOR
TEXT 3
SENSOR TYPE
MM/DD/YYYY
YYYY/MM/DD
DD/MM/YYYY
NONE
FLOW
pH
ORP
FACTORY
ENTER
saves
changes
TIME FORMAT
TEXT 3
24 HOUR
SET TIME
TEXT 3
08:56:47
DATE FORMAT
TEXT 3
MM/DD/YYYY
SET DATE
TEXT 3
02/25/2016
SET DECIMAL MARK
TEXT 3
999.99
SELECT UNITS
TEXT 3
U.S. CUSTOMARY
SETUP
3
CHANNEL 1
PRESS ENTER
SETUP
CHANNEL 2
PRESS ENTER
EXIT STARTUP
PRESS ENTER
ENGLISH
DEUTCH
ESPAÑOL
中文
FRANÇ
Easy Set Up can be
entered by setting
either or both channels
to Factory and cycling
power on the 9950.
This menu operation sets up the 9950 for basic function:
1. Select desired language using the [UP] and [DOWN] arrows.
Press ENTER to save.
2. Press
►
to select the TIME FORMAT.
Press
▲
or
▼
to select 24 hour or AM/PM.
Press ENTER to save the format selection.
3. Press
the
▼
move to the next selection, SET TIME.
Press
►
to scroll through hours, and minutes place values.
Use
▲
or
▼
to adjust the value.
Press ENTER to save the time selection.
4. Press
▼
to move to the next selection, SET DATE FORMAT.
Press
►
to select the MM/DD/YYYY date format and
▼
or
▲
to scroll through other format options.
Press ENTER to save the date format selection.
5. Press
▼
to move to the next selection, SET DATE.
Press
►
to scroll through the days, months, and years.
Use
▲
or
▼
to adjust the number, and
►
to select the next
number.
Press ENTER to save the Date selection.
6. Press
▼
to move to the next selection,
SET DECIMAL MARK.
Press
►
and use
▲
or
▼
to highlight desired decimal
separator (comma or decimal mark).
Press ENTER to save the decimal mark selection.
7. Press
▼
to move to the next selection, SELECT UNITS.
Press
►
and scroll
▲
or
▼
to choose Metric or
U.S. Customary.
Press ENTER save unit selection.
8. Press
▼
to move to the next selection SETUP CHANNEL 1.
Press ENTER, ('Looking for Sensor Type' will appear on
the screen).
The 9950 will search for an attached S
3
L sensor on
Channel 1. The found sensor type will be highlighted.
If your desired sensor is not highlighted, use the
▲
or
▼
to scroll through the sensor list and select
another sensor type.
Press ENTER to save sensor type selected.
Press
▲
or
▼
to access screens to adjust common
sensor
parameters.
►
= edit, ENTER = Save,
▲
+
▼
= Cancel.
Press
▲
+
▼
to return to SETUP CHANNEL 1 screen.
9. Press
▼
to move to the next selection, SETUP CHANNEL 2.
Repeat steps in number 8 to set up Channel 2.
Press
▼
to go back to Channel 1, if desired.
When done, press
▲
+
▼
together one time exits to the
previous menu. Press
▲
+
▼
together a second time to exit
Easy Start Up.
System Startup: Step 3
Assign the unique operating parameters for your system.
System Setup
