TS 5000 ISM BG
GB 5
Mounting and securing
Fig.: 6.3.2
X
Loosen clamping screw (
1.
).
X
Thread wire cable with wire cable redirection into oblong hole (
2.
).
X
Thread past the clamping screw and guide out the oblong hole (
3.
).
X
Tension wire cable firmly and tighten clamping screw (
4.
).
X
Mount trigger lever (
5.
).
X
Loosen clamping part again (
6.
) Screw in set screw (do not tighten lock nut yet!).
X
Shorten wire cable to an excess of 30–50 mm to the outer edge of the guide rail. (
7.
).
6.4 Connect sliding lever of fixed leaf with sliding block
Fig.: 6.4.1
X
Close closing-time valve.
X
Connect sliding lever to sliding block (tightening torque: 5 Nm).
X
Open closing-time valve again.