TS 5000 E BG
GB 5
Mounting and securing
6.3 Mount sliding lever and connect with sliding block
4.
6.
8.
5.
5.
2.
3.
45°
1.
7.
SW 3
Fig.: 6.3.1
X
Close closing-time valve (
1.
).
X
Set sliding lever in place (
2.
).
X
Turn sliding lever about 45° to position the notch (
3.
).
X
Remove sliding lever (
4.
).
Now the sliding lever can be appropriately attached to the notch.
X
Align and fit sliding lever with notch (
5.
).
X
Fix sliding lever (tightening torque 14 Nm) (
6.
).
X
Connect sliding lever to sliding block (tightening torque 5 Nm) (
7.
).
X
Open closing-time valve again (
8.
).
6.4 24V connection
X
Connect 24 V cable to lustre terminal. Electrical hold-open device is powered.
red = ”+” (terminal 1)
white = ”-” (terminal 2)
Fig.: 6.4.1
