TS 5000 E BG
GB 4
Mounting and securing
X
Mark out and drill fixing holes for door closer and guide rail using fitting template or cut M5 thread
if necessary.
X
Drill additional hole (A) for 24V DC power supply.
In case this product is in use with an hold-open device, please observe the document “Instructions for
Installation, Commissioning, Operation and Maintenance of the GEZE Hold-Open Device FA GC” as well.
6.2 Mount guide rail and end caps
Fig.: 6.2.1
The cable connection must point to the pull side
X
Align spacers on guide rail (
1.
).
X
Fix guide rail in place (tightening torque: 2 Nm) (
2.
).
X
Align end caps and screw it on (
3.
).
X
Mount door closer according to instructions (
4.
).
All screwing torques are to be adjusted on site, if necessary.
