SECULOGIC T 320
4
Safety and liability
2
Safety and liability
The GEZE terminal was designed according to state-of-the-art technology and recognised, safety-related regulations.
However, there might be danger during installation and use. Therefore, pay attention to the following instructions.
2.1 Basic safety instructions
X
X
Installation, commissioning and repairs may only be carried out by experts authorised by GEZE.
X
X
Use only GEZE original parts for repair work.
X
X
GEZE assumes no liability for damages resulting from unauthorised changes to the system.
X
X
Primary safety measures take place on site.
X
X
The standards VDE 0100 and VDE 0815 must be observed during cable routing.
X
X
An expert must check the doors with electric locking mechanism in the escape routes once a year.
The expert is to issue a certificate on the in-service inspection, which the operator has to show
on demand to the building supervisory board. Inspection can be carried out by a GEZE
service technician or a professional organisation authorised by GEZE.
X
X
Furthermore, GEZE recommends that the operator inspects the escape route system monthly for externally
identifiable damages and defects. Such damages and defects, if existing, must be repaired immediately by a
GEZE service technician or a professional organisation authorised by GEZE.
Intended Use
The GEZE door control unit is designed to control and monitor electrically locked emergency routes.
External products may only be integrated after consulting GEZE.
Contrary to intended use
The connection of products which were not expressly approved for use by GEZE is contrary to the intended
purpose.
2.2 Product liability
à
In accordance with the manufacturer's defined liability for its products in the Product Liability Act,
attention should be paid to the information contained here and in corresponding installation instructions and
connection diagrams for the product (product information, intended use, incorrect use, product performance,
product maintenance, obligations to supply information and instructions). Non-observance releases the
manufacturer from its liability.
à
Only experts authorised by GEZE may carry out installation, functional inspection and maintenance.
GEZE assumes no liability for damages resulting from unauthorised changes to the system.
à
GEZE assumes no liability for combining with devices from other manufacturers. Use only GEZE original parts
for repair work and maintenance.
