Gewiss CHORUS GWA9007CB, Руководство по программированию

Страница: 18 / 46

page 18 |
7”
TOUCH PANEL
| PROGRAMMING MANUAL
Adding a push-button to the outdoor position for opening a door or switching on a stair raiser
light
If an outdoor position is associated with the opening of a door/gate and/or the switch-on of a stair raiser
light, a push-button can be configured to enable the activation of this function during communication
with the outdoor position.
A DTMF tone (only used to activate the local relay of the outdoor position (e.g. “2N” products), or http
commands (used to activate relay actuators not directly connected to the outdoor position but connected
to the local IP network) can be sent to the push-button.
During the configuration, click on “
Add button
” at the bottom of the page if you want to add a push-
button (up to 5) for “Open door/gate” commands and/or http command for using the web relays. Follow
the procedure:
1.
Click on “
Add button
”:
2. Fill in the fields on the page that opens:

Button label* : the text below the push-
button, shown during the call (e.g. “Open”)

Icon* : the type of icon you want to use for the push-button being added

Button type* : DTFM or http, depending on what has been configured on the outdoor
position or the web relay associated
Depending on the type of push-button to be added, the following fields must also be filled in:
TYPE OF PUSH-BUTTON
DTFM HTTP
DTMF code*
NOTE: the DTMF code entered must be followed
by “*”; otherwise, the configuration cannot be
saved
HTTP method
URL http*
Authorisation
HTTP method
GET
POST
PUT
DELETE
The fields marked with an asterisk must necessarily be filled in.
DTFM screen