NOTE: The maximum amount of milk
allowed to be added is 150 mL (see Fig-
ure 1) to avoid milk overflow after mixing.
The min milk quantity permitted to add
is 75mL. Suggest:Please use whole milk.
16
15
（4） Connect the plug into a power outlet.
（5） Press the FUNCTION button ❸ four
times, the working indicator of Heat Milk
icon ❽ will blink. Then press the ON/OFF
button ❹ once, the working indicator of
Heat Milk icon ❽ will turn to illuminate
solidly，the appliance will start to work.
Once the temperature of milk has achieved
the setting value, appliance will stop wor-
king, it takes about 40-180 seconds;
(6) When the appliance stop operating, open the Jug lid ❶, pour
out the warm milk and enjoy it.
7. CLEANING AND MAINTENANCE
(7) Always turn off the milk frother and disconnect the power
supply when not use.
Always disconnect the appliance from the power outlet and
allow it cooling down before cleaning.
(1) Wash The Jug lid ❶ with water and mild detergent. The Jug
lid ❶ is not dishwasher safe component. Rinse thoroughly and
dry.
(2) Remove the Frothing Whisks ❿, and rinse thoroughly with
warm water.
(3) Wash the inner of jug with a combination of a mild detergent
and water and then wipe clean with a soft damp cloth.
(4) Use a clean damp cloth to scrub the body ❷ and bottom of
the product. It is not recommended to use water to rinse the
CAUTION: Never immerse the jug, power cord in water, or
allow moisture to contact with these parts.
NOTE: Please clean the jug according to the section “CLEA-
NING AND MAINTENANCE” between two continuous cycles
of use.
Cold
Milk Foam
t
a
e
H
e
t
a
l
o
c
o
h
C
k
li
M
Hot
Milk Foam
Cold
Milk Foam
t
a
e
H
e
t
a
l
o
c
o
h
C
t
a
e
H
Hot
Milk Foam
Cold
Milk Foam
t
a
e
H
e
t
a
l
o
c
o
h
C
k
li
M
Hot
Milk Foam
Cold
Milk Foam
t
a
e
H
e
t
a
l
o
c
o
h
C
t
a
e
H
Hot
Milk Foam
MAX
MIN
