Gevi GECME400BA-U, Инструкция по эксплуатации

Страница: 11 / 16

20 19
(5) Prepare a pitcher with about 100mL of milk. We recommend to use
whole milk about 41-45℉. Take the pitcher with the milk and insert
steam wand ❼ into the milk.
(4) When the icons on the LED display
screen ❶ become fixed, the heating is
completed and the appliance pass to
ready condition.
(6) Rotate the coffee/steam knob selector
❹ to steam function icon , steam will
come out from the steam wand ❼.
(7) Froth milk by moving vessel round
from up to down.
(8) After the milk increase in volume by
two times or your required purpose is re-
ached, you can turn the coffee/steam knob
selector back to “ 〇 ”position.
(9) Take away the pitcher. Your milk foam
is ready now.
Note: 1.When you finish milk frothi-
ng and turn the coffee/steam knob
selector ❹ back to “ 〇 ”position, the
pressure relief hole ❿ will make a loud
noise. It is because the machine relie-
ving the pressure, which is normal and not a problem.
2.During the milk frothing, if there is suddenly a noise and coming
out with small steam. Please check if there is enough water in the
water tank ⓰ and add water in time. When the water left the water
tank is going to finish, it will produce a louder noise. After adding
water, it will operate as usual.
1. To avoid blocking the steam wand
❼, we suggest to clean the steam wand
❼ immediately after finish frothing
milk. When the screen stop flashing,
rotate the coffee/steam knob selector
5.3.2 HOW TO CLEAN THE STEAM NOZZLE
Note: (Please mind the hot water and operate carefully)
x1
x2