Check that all accessories are complete and the unit is not
damaged. Add water into water tank to the MAX level of water
gauge and brew water for several times without coffee powder,
then discard the water. Clean all detachable parts thoroughly
with warm water.
Add coffee powder into paper filter. Usually a cup of coffee
need a level spoon of coffee powder, but you may adjust
according to personal taste. Close the top cover completely.
Insert the carafe on the warming plate horizontally.
Plug the power cord into the outlet. The LCD will display
“AM12:00” together with the “ : ” flickers.
Press ON/OFF button, the indicator of RUN will be illuminated.
The appliance will begin working.
The brewing process can be interrupted by pressing the
ON/OFF button at any time, and the indicator of RUN will be
extinguished. The appliance will continue brewing once
ON/OFF is pressed again.
NOTE:
You can take out carafe, pour and serve at any time.
The appliance will stop dripping automatically. But the
time cannot exceed 30 seconds.
Remove out carafe to serve when finish brewing (about
one minute later after the coffee stops dripping out.)
NOTE:
The coffee you get will less than the water you have
added, as some water is absorbed by coffee ground.
When the process is finished, if you do not want to serve
immediately, keep the coffee maker is energized, the coffee
can be kept warm in the warming plate, and the appliance
3.
4.
5.
6.
7.
8.
9.
Open the top cover and fill the water tank with drinking
water. The water level should not exceed MAX level as
indicated in the water tank.
Place the funnel into the funnel support, make sure it is
assembled correctly, otherwise the top cover cannot be
closed. Place a paper filter in the funnel.
1.
2.
CONTROL PANEL
BEFORE FIRST USE
USING YOUR COFFEE MAKER
