Note:
the brewed coffee you get will be slightly less than
the water you have added as some water is absorbed by
coffee powder. DO NOT touch cover ,and so on when
operating as they are very hot.
Always turn the coffee maker off and disconnect the
power supply after use.
9.
CLEANING AND MAINTENANCE
CAUTION:
Never immerse the unit or power cord into water
or any other liquid for cleaning.
1.
2.
3.
4.
Clean all detachable parts after each use in hot, sudsy
water.
Wipe the product’s exterior surface with a soft, damp
cloth to remove stains.
Water droplets may buildup in the area above the funnel
and drip onto the product base during brewing. To con-
trol the dripping, wipe off the area with a clean, dry cloth
after each use of the product.
Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
Fill the tank with the vinegar solution to the maximum
level as indicated on water gauge.
Make sure funnel(without coffee powder) are assembled
in place.
Switch on the appliance and allow it to “brew” de-scaling
solution.
After “brew” one-cup solution, switch off the appliance.
Leave the solution stay for 15 minutes add water and
repeat step 3-5.
Rinse by operating the appliance with water at least 3
times.
To keep your coffee maker operating efficiently, periodically
you should clean away the mineral deposits left by the water
according to the water quality in your area and the use
frequency. We recommend decalcifying your coffee maker
as follows, using a solution of white vinegar and cold water.
A solution of two tablespoons (30ml) white vinegar in one
Ceramic jug of cold water works best.
1.
2.
3.
4.
5.
6.
