USING YOUR COFFEE MAKER
Open the water tank lid and fill the water tank with cold
drinking water. The water level should not exceed MAX
level as indicated on water gauge.
Swing the sprayer out, put the funnel into Water tank,
then place the filter in the funnel, and make sure it is
assembled correctly.
Add coffee powder into filter. Usually a cup of coffee
needs a level spoon of coffee powder, but you may adjust
according to personal taste. Close the top cover.
Put the Ceramic jug in the right place.
Plug the power cord into the outlet.
Pressing the switch down, the indicator will be illuminat-
ed. The appliance will begin working.
In order to prevent the machine from drying up, the ma-
chine will automatically power off after 7 minutes of
power on; if you want to continue using the machine, you
need to press the switch again.
Upon completion of brewing coffee, that is one minute
later after the coffee stops dripping out, you can remove
the Ceramic jug, pour and serve.
1.
2.
3.
4.
5.
6.
7.
8.
BEFORE THE FIRST USE
Check that all accessories are complete and the unit is not
damaged. Add clean water up to maximum level to brew sev-
eral times without coffee powder according to the steps
below, and then discard the water. Wash the detachable
parts thoroughly with warm water.
KNOW YOUR COFFEE MAKER
