Geutebruck 5.04720, Руководство по установке

Страница: 13 / 25

13
4. Access Camera
For initial access to the IP camera, users can search the camera through the installer program:
DeviceSearch.exe.
Accessing the Camera by Device Search Software
▪
Step 1: Double click on the program Device Search.exe.
▪
Step 2: After its window appears, click on the <Device Search> button on the top. All the
finding IP devices will be listed in the page.
▪
Step 3: Find the camera in the list by its IP address and click on it. The default IP address of
the camera is: 192.168.0.250.
▪
Step 4: The default IP address of the camera may not be in the same LAN as the IP address of
the PC. If so, the IP address of the camera needs to be changed. Right click on the camera and
click <Network Setup>. Meanwhile, record the MAC address of the camera, for future
identification.
▪
Step 5: The <Network Setup> page will come out. Select <DHCP> and click <Apply> down the
page. The camera will be assigned with a new IP address.
▪
Step 6: Click <OK> on the Note of setting change. Wait for one minute to re-search the
camera.
▪
Step 7: Click on the <Device Search> button to re-search all the devices. Find the camera in
the list by its MAC address. Then double click or right click and select <Browse> to access the
camera directly via a web browser.
▪
Step 8: A prompt window requesting for default username and password will appear. Enter the
default username and password shown below to login to the camera.
Login ID Password
root admin
NOTE: ID and password are case sensitive.
NOTE:
It is strongly advised that administrator’s password be altered for the security
concerns.