Getnet GA-524WA, Руководство пользователя, Страница: 21 / 114

13
4. IP Address Setting
If you lost the CD-ROM or you prefer the traditional web setup, please follow
the procedures of chapter 4 and chapter 5 to configure the router. Using the
router to get into the Internet, the PCs in the network must have Ethernet
adapter installed and be connected to the router either directly or through a
hub or switch. The TCP/IP protocol of each PC has to been installed and the
IP Address of each PC has to be set in the same subnet as the router.
The router’s default IP Address is 192.168.1.1 and the subnet mask is
255.255.255.0 . PCs can be configured to obtain IP Address automatically
through the DHCP Server of the router or a fixed IP Address in order to be in
the same subnet as the router. By default, the DHCP Server of the router is
enabled and will dispatch IP Address to PC from 192.168.1.100 to
192.168.1.200 . It is strongly recommended to set obtaining IP address
automatically.
This section shows you how to configure your PC’s so that it can obtain an IP
address automatically for either Windows 95/98/Me, 2000 or NT operating
systems. For other operating systems (Macintosh, Sun, etc.), please follow
the manual of the operating systems. The following is a step-by-step
illustration on how to configure your PC to obtain an IP address automatically
for Windows 7, Windows Vista , Windows XP and Windows 2000 .
Windows Vista / 7
1. Click the Start button and select Settings and then select Control Panel.
Double click Network and Sharing Center, the Network and Sharing
Center window will appear.
2. Click Manage network connections and right click on the Local Area
Connection icon and select Properties . The Local Area Connection
window will appear.
3. Check your list of Network Components. You should see Internet Protocol
Version 4 (TCP/IPv4) on your list. Select it and click the Properties button.