Getnet GA-524WA Скачать руководство пользователя страница 107

Страница: 107 / 114

Default Gateway (Router)

Every non-router IP device needs to configure a default gateway’s IP address.

When the device sends out an IP packet, if the destination is not on the same

network, the device has to send the packet to its default gateway, which will

then send it out towards the destination.

DHCP

Dynamic Host Configuration Protocol, this protocol automatically gives every

computer on your home network an IP address.

DNS Server IP Address

DNS stands for Domain Name System, which allows Internet servers to have

a domain name (such as www. ADSLrouter.com) and one or more IP

addresses (such as 192.34.45.8). A DNS server keeps a database of Internet

servers and their respective domain names and IP addresses, so that when a

domain name is requested (as in typing " ADSLrouter.com" into your Internet

browser), the user is sent to the proper IP address. The DNS server IP

address used by the computers on your home network is the location of the

DNS server your ISP has assigned to you.

DSL

Digital Line Subscriber (DSL) technology provides high-speed access over

twisted copper pair for connection to the Internet, LAN interfaces, and to DSL

services such as video-on-demand, distance learning, and video conferencing.

Ethernet

It is a standard for computer networks. Ethernet networks are connected by

special cables and hubs or switches, and move data around at up to 10/100

million bits per second (Mbps).

FTP

File Transfer Protocol. The Internet protocol (and program) used to transfer

files between hosts.

Idle Timeout

Содержание GA-524WA



















































































































Результаты поиска

Содержание GA-524WA

Отзывы:

Getnet GA-524WA, Руководство пользователя, Страница: 107 / 114

Результаты поиска

Содержание GA-524WA

Отзывы: