Operating instructions
5000376-00
Version 990426
11
For certain process faults, information about the cause of the fault appears in
the display window on the front panel. Certain fault messages must be
acknowledged once the fault has been remedied (no acknowledgement is
required for a message indicating the need to fill with an agent); see also under
the heading, "Acknowledging a fault message".
Fault message
Note
Measure
Temperature sensor Contact the authoriz
Fault message requiring attendance by a service technician
F1
F2
fault.
service personnel.
Tank level sensor
Contact the authorized
fault.
service personnel.
Machine
Contact the authorized
configuration
service personnel.
Inspection
Contact the authorized
service personnel.
Disinfection
Contact the authorized
temperature
service personnel.
Lid unlocked/open
Contact the authorized
service personnel.
Fault in check sum
Contact the authorized
service personnel.
Tank level not
Contact the authorized
reached
service personnel.
Leakage
Contact the authorized
service personnel.
Lid operating time
Contact the authorized
service personnel.
Rotator operating
Contact the authorized
time
service personnel.
Logic fault in rotator Contact the authorized
service personnel.
Communications
Contact the authorized
fault, EEprom
service personnel.
F5
F6
F7
F10
F11
F8
F9
F16
F15
F14
F17