78812021-EN
CardioMem
®
CM 100 XT
29
10.4 Connecting the electrodes to the recorder
Place the recorder with the front side down to a level surface (ta-
ble).
Take three new disposable ECG electrodes. Do not yet remove
the protective film from the contact sides of the electrodes.
Snap the studs of the electrodes into the adapters on the rear of
the recorder (Fig. 6).
CAUTION
Only use ECG electrodes that are clearly marked as such
for single use. Otherwise, allergic skin reactions can oc-
cur.
CAUTION
To avoid infections, do not use electrodes that have al-
ready been used by another patient.
CAUTION
Observe the expiration date of the ECG electrodes. Do
not use ECG electrodes after their expiration date be-
cause this could impair the signal quality.
Fig. 6
– Connecting the electrodes