manualshive.com logo in svg

Getac X500, Руководство пользователя

Поделиться
Скачать
Getac X500 Скачать руководство пользователя страница 77

 

Expanding Your Computer  

 4-9

 

Using PC Cards 

NOTE: 

z

 

Some PC cards require additional system resources. Before using such PC 
card, you may have to free other system resources for the PC card. 

z

 

Although some PC cards can be inserted and removed without turning 
off the computer, you cannot remove or install PC cards during Sleep 
mode. 

 

Your computer has two PC card slots which support PCMCIA Type II and 
CardBus specifications. 

To insert a PC card: 

1.

 

Locate the PC card slot on the left side of the computer and open the 
protective cover. 

2.

 

Slide the PC card, with its label facing up, into the slot until the eject 
button pops out. 

 

3.

 

Close the cover. 

4.

 

When a new card is seated, the computer will detect it and try to install 
the appropriate driver. Follow the on-screen instructions to complete the 
process. 

To remove a PC card: 

1.

 

Double-click on the 

Safely Remove Hardware 

 icon found on the 

Windows taskbar and the 

Safely Remove Hardware

 window appears on 

screen. 

Eject button 

Содержание X500

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды