Getac X500 Скачать руководство пользователя страница 128

Страница: 128 / 152

8-6

Troubleshooting

The ExpressCard stops communicating properly.

The application may have been reset when the computer is turned off or
in Sleep mode. Exit and restart the application.

Hardware Device Problems

The computer does not recognize a newly installed device.

The device may not be correctly configured in the BIOS Setup program.
Run the BIOS Setup program to identify the new type.

Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)

Make sure if the device needs any jumper or switch settings. (Refer to
the documentation that came with the device.)

Check the cables or power cords for correct connections.

For an external device that has its own power switch, make sure that the
power is turned on.

Hard Disk Drive Problems

The hard disk drive error message appears on the screen.

The hard disk drive has defects. Ask your dealer for help.

The hard disk drive operations seem slow.

The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s

Disk Defragmenter

to defragment the files.

The hard disk drive in-use indicator glows without blinking.

The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s

Disk Defragmenter

to defragment the files.

Содержание X500

























































































































































Результаты поиска

Содержание X500

Отзывы:

Бренды по названию

Популярные бренды

Getac X500, Руководство пользователя

Результаты поиска

Содержание X500

Отзывы:

Бренды по названию

Популярные бренды