Getac P470 Скачать руководство пользователя

Страница: 117 / 141

Troubleshooting

8-5



Make sure that the other device is not in “Hidden” mode.



Make sure that both devices are compatible.

Display Problems

Nothing appears on the screen.



During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.



The brightness level might be too low. Increase brightness by
pressing the

hot key.



The display output might be set to an external device. To switch the
display back to the LCD, press the

hot key or through the

Display Settings

Properties of Windows Vista (via settings in

Display

Properties of Windows XP).

The characters on the screen are dim.



Adjust the brightness and/or contrast.

Bad dots appear on the display at all times.



A small number of missing, discolored, or bright dots on the screen
are an intrinsic characteristic of TFT LCD technology. It is not
regarded as a LCD defect.

Resolution cannot be adjusted to desired setting.



Make sure that the device driver is installed correctly.

The external monitor displays nothing.



Make sure that the monitor is turned on.



Make sure that the monitor’s signal cable is properly connected.



Switch the display to the monitor by pressing the

hot key

through the

Display Settings

Properties of Windows Vista (via

settings in

Display

Properties of Windows XP).

Содержание P470














































































































































Результаты поиска

Содержание P470

Отзывы:

Похожие инструкции для P470

Бренды по названию

Популярные бренды

Getac P470, Руководство пользователя

Результаты поиска

Содержание P470

Отзывы:

Похожие инструкции для P470

Бренды по названию

Популярные бренды