Getac 320GOBI3 страница 98 Скачать руководство пользователя

Страница: 98 / 148

5-16

Using BIOS Setup and System Recovery

System Recovery

Use System Recovery when:



The Windows operating system does not start at all.



You want to restore the system to the factory state.

WARNING:



Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive
will be lost.



Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.

To run System Recovery:

Connect the AC adapter.

Turn on the computer. During system startup when the following screen
appears, press

Ctrl + Alt + F2

keys for four second.

In the screen that appears, select

Recovery

to start the recovery process.

Содержание 320GOBI3





















































































































































Результаты поиска

Содержание 320GOBI3

Отзывы:

Похожие инструкции для 320GOBI3

Бренды по названию

Популярные бренды

Getac 320GOBI3, Руководство пользователя

Результаты поиска

Содержание 320GOBI3

Отзывы:

Похожие инструкции для 320GOBI3

Бренды по названию

Популярные бренды